A Study on the Performance Analysis of Machine Guidance and Drone Surveying Technology

Seung Hoon Shin; Soo Min Lee; Jong Won Seo

doi:10.55785/JCAR.1.4.1

All Issue

2022 Vol.1, Issue 4 Next Page

A Study on the Performance Analysis of Machine Guidance and Drone Surveying Technology 머신가이던스와 드론측량 기술의 성능분석에 관한 연구

26 December 2022. pp. 1-30

PDF XML

Abstract

It has been known through many studies and papers that using smart construction technology can increase productivity, shorten construction periods, and reduce costs. Following the example of automated equipment and BIM (Building Information Modeling) application in advanced countries, the Korean government is pouring out related goals and policies. However, it is confirmed that the application of ICT (Information and Communication Technologies) technology to actual sites is still small at the construction site in Korea. The reason for this is because of the nature of conservative construction work, and it is understood that the data from the study did not reflect the actual site environment and that the research results in the testbed were numerous. The research results in such a test environment are not a clear basis for the designer who proposes the technology and the contractor who uses the technology. They want experienced and proven skills. In this study, machine guidance technology and UAV (Unmanned Aerial Vehicle) survey technology that meet the upper plan among ICT technologies are applied to the actual site for a long time, and cases are analyzed to obtain quantitative data on productivity, quality, and cost. Qualitative data is acquired by conducting semi-structured interviews with site managers and workers who have experienced ICT technology in the field. Valuation is performed using the quantitative and qualitative data thus obtained. Valuation analysis data shows the performance of an application in a real environment, not an experimental environment. The results of this study provide verified results as data in the real environment of ICT technology. This will help determine the early on-site application of ICT technology to the construction site and consequently will accelerate the on-site application of ICT construction technology and help achieve the government’s targeted construction automation goals.

Keywords

ICT

BIM

Machine Guidance

UAV

ICT(Information and Communication Technologies) 건설기술을 사용하면 생산성을 높이고, 건설 기간을 단축하며, 비용을 절감할 수 있다는 것은 많은 연구와 논문을 통해 알려져 왔다. 선진국의 자동화 장비 및 BIM(Building Information Modeling) 적용 사례를 본받아 한국 정부가 관련 목표와 정책을 쏟아내고 있다. 그러나 국내 건설현장에서 ICT 건설기술의 실제 현장 적용은 여전히 미미한 것으로 확인되고 있다. 그 이유는 보수적인 건설공사의 특성상 실제 현장 환경을 반영하지 못했고, 테스트베드에서의 연구결과가 많았던 것으로 파악된다. 이러한 시험 환경에서 연구 결과는 기술을 제안하는 설계자와 기술을 사용하는 계약자에게 명확한 근거가 되지 못하며, 그들은 경험 많고 검증된 기술을 원한다. 본 연구에서는 ICT 건설기술 기술 중 상위 계획에 부합하는 머신가이던스 기술과 드론측량 기술을 실제 현장에 장기간 적용하고, 이를 분석하여 생산성, 품질, 비용에 대한 정량적 데이터를 얻는다. 현장 관리자 및 현장에서 ICT 건설기술을 경험한 근로자를 대상으로 반구조적 인터뷰를 실시하여 질적 데이터를 획득한다. 성능분석은 이렇게 얻은 양적 및 정성적 데이터를 사용하여 수행된다. 성능분석 데이터는 실험 환경이 아닌 실제 환경에서 대상 기술의 성능을 보여준다. 본 연구의 결과는 ICT 건설기술의 실제 환경에서 데이터로서 검증된 결과를 제공한다. 이를 통해 건설현장에 대한 ICT 건설기술의 현장적용 조기 판정에 도움이 될 것이며, 결과적으로 ICT 건설기술의 현장 적용을 가속화하고 정부의 목표 건설 자동화 목표 달성에 도움이 될 것이다.

키워드

ICT

BIM

머신가이던스

드론측량

References

Andrew, J. S. (2013). Critical Values for Lawshe's Content Validity Ratio. University College Cork.

Barriball, K. L., and While, A. (1994). Collecting Data using a semi‐structured interview: A discussion paper. Journal of advanced nursing, 19(2), 328-335. 10.1111/j.1365-2648.1994.tb01088.x8188965

Cho, G., Cho, Y., and Kang, H. S. (2003). The Analytic Hierarchy Process. Dong-Hyeon Sa, pp. 33-41.

Cohen, D., and Crabtree, B. (2006). Qualitative Research Guidelines Project.

DiCicco-Bloom, B., and Crabtree, B. F. (2006). The qualitative research interview. Medical education, 40(4), pp. 314-321. 10.1111/j.1365-2929.2006.02418.x16573666

Kang, S. K. (2019). Field Application Verification of Calculate Earthwork Volumes Using Drone Photogrammetry. Hanyang University Master's thesis.

Kim, H. G., Kim, H. J., and Park S. J. (2015). Applicability of Drone in Construction Industry. Construction Engineering and Management, 16(4), pp. 3-8. 10.6106/KJCEM.2015.16.3.132

Lawshe, C.H. (1975). A quantitative approach to content validity. Personnel Psychology, 28, pp. 563-575 10.1111/j.1744-6570.1975.tb01393.x

Lee, J. (2006). Delphi method, Education Science History.

Lee, J. (2003). Qualitative Research Method, Seoul National University Medical Management Research Institute Topic Review.

Lee, S. B., Park, J. H., and Ahn, Y. J. (2020). Development of the Standard Work Labor Estimate on UAV Photogrammetry Using Drone. Journal of Korean Society for Geospatial Information Science, 28(1), pp. 41-54. 10.7319/kogsis.2020.28.1.041

Ministry of Land, Infrastructure and Transport (2018a). Smart Construction Technology Roadmap, pp. 5-9.

Ministry of Land, Infrastructure and Transport (2018b). The Final Report on Construction Equipment Control and Smart Construction Technology Development Using ICT.

National Academies of Science, Engineering, and Medicine (2018). Use of Automated Machine Guidance within the Transportation Industry.

Saaty, T. L. (1980). The Analytic Hierarchy Process, McGraw-Hill, pp. 14-20. 10.21236/ADA214804

Saaty, T. L. (1982). The Analytic Hierarchy Process : A New Approach to deal with Fuzziness in Architecture. Architect Science Review, pp. 64-99. 10.1080/00038628.1982.9696499

Yoon, J. S., Lee, S. S., Park, S. H., Lee, S. M., and Seo, J. W. (2016). Earthwork Test and Performance Evaluation using Machine Guidance for Excavator. Korean Society of Civil Engineers, pp. 21-22.

Information

Publisher :Korean Society of Automation and Robotics in Construction
Publisher(Ko) :(사)한국건설자동화·로보틱스학회
Journal Title :Journal of Construction Automation and Robotics
Journal Title(Ko) :건설자동화·로보틱스 논문집
Volume : 1
No :4
Pages :1-30
Received Date : 2022-10-26
Revised Date : 2022-11-02
Accepted Date : 2022-11-04
DOI :https://doi.org/10.55785/JCAR.1.4.1

Journal of Construction Automation and Robotics ISSN:2800-0552(Print) 2951-116X(Online) 건설자동화·로보틱스 논문집

All Issue